Honeywell Dolphin 70e Black, Руководство пользователя

Страница: 115 / 184

7 - 13
WLAN (802.11a/b/g/n)
The Dolphin 70e Black has a 2.4 GHz 802.11b/g/n - 5.0 GHz 802.11a/n WLAN (Wireless Local Area
Network) radio. The radio is interoperable with other 802.11a/b/g/n, Wi-Fi compliant products including
access points (APs), workstations via PC card adapters, and other wireless portable devices. By default,
the 802.11a/b/g/n radio is enabled after each factory reset. The next step is to configure the connection
parameters of the radio to connect to a wireless network.
WLAN Radio
The WLAN radio is configured in the Honeywell WLAN Security Supplicant, which you access by
touching the WLAN SWC icon on the Start menu. For complete configuration instructions, download the
Honeywell Secure Wireless Client (SWC) User’s Guide from www.honeywellaidc.com . A link to this
guide appears on the Dolphin 70e Black product page.
Adding Programs Using the Internet
When you have established a network connection, you can access the Internet and download additional
software programs. When selecting additional software,
always verify your Dolphin terminal meets
the minimum system requirements to run the software (e.g., available memory, processor, and
operating system) before attempting to download the software.
Note: To verify the terminal processor, touch > Settings > System > About . The processor is displayed on the
Version screen.
1. Open Internet Explorer and navigate to the program’s location. You may see a single *.exe or
setup.exe file, or several versions of files for different device types and processors.
2. Select the program version that matches your Dolphin terminal OS and processor.
3. Read any installation instructions, Read Me files, or documentation that comes with the program.
Many programs provide special installation instructions.
4. Download the program to the terminal directly from the Internet. You would normally store the
program in the \Program Files folder unless another location is required by the program.
5. On the terminal, touch the installer file: e.g., *.exe or setup.exe file.
6. The installation wizard for the program begins.
7. Follow the directions on the screen to complete the installation.
Software Upgrades
Contact a Honeywell technical support representative for information on available software upgrades for
your Dolphin terminal, see
Customer Support on page 16-1. or go to www.honeywellaidc.com .
To prevent data loss, back up all user data to a microSD card or external memory device before
performing an upgrade.
Note: An active Microsoft ActiveSync or Windows Mobile Device Center connection between a host workstation and
the Dolphin terminal may be required for some types of software upgrades. For additional information, see
Connecting and Synchronizing the Terminal and Workstation on page 7-9.
For information on File Provisioning on the Dolphin 70e Black , see page 2-13.
!