Honeywell Dolphin 70e Black, Руководство пользователя

Страница: 177 / 184

15 - 7
1. Tap > Power Tools > Network Utilities > IPConfig .
2. Change the Adapter to SMSC95001.
3. On the Input tab, tap the Display full configuration button.
4. The Dolphin terminal retrieves and displays the IP configuration for the entire Dolphin terminal and
the Net Base terminal well where the Dolphin is docked.
5. Locate the IpAddress field in the IP configuration list.
Mounting the Net Base
Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure
to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal
while it is in the base. When choosing a location, keep in mind that the mounting location must allow
users to see the LEDs and provide easy access to the terminal wells, the Ethernet ports, and the power
jack.
Bottom Panel
Optional DIN Rail Mount
A DIN rail (7.5 X 35 mm) may be installed on the bottom of the base to provide the optional security of
mounting the base to a flat horizontal surface with hardware.
Additional Hardware
• DIN Rail, Qty. 1
• 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4
• 3/16 in. dia nut, Qty. 2
Note: The items listed above are for reference only. Final hardware selection is dependent on the material type and
thickness of the mounting surface.
DIN Rail Slot
Rubber Feet, Qty. 6