Honeywell CN75, Руководство пользователя

Страница: 104 / 256

92 75 Series Mobile Computer User Guide
Configure Static WEP Security with Funk Security
Before you set static WEP security with Funk security, you need to enable the radio
on your computer and set the date. Honeywell recommends that you use WPA2-
PSK instead of WEP if possible.
1. Start Enterprise Settings .
2. Select Communications > 802.11 Radio > Funk Security .
3. Select a Funk security profile to configure.
4. Enter the SSID.
5. For Association, select Open .
6. For Encryption, select WEP.
7. For 8021x, select None.
8. Enter an ASCII key or hex key value for each key you want to use (Key 1 through
Key 4):
• For 64-bit WEP, enter a 5-byte value: 5 ASCII characters or 0x followed by 5
hexadecimal pairs.
• For 128-bit WEP, enter a 13-byte value: 13 ASCII characters or 0x followed
by 13 hexadecimal pairs.
9. Select the Transmit key you want to use to transmit data.
10. Tap OK .
Use Open (No Security) Associations with Funk Security
To create an open network, you can set no security with Funk security.
1. Start Enterprise Settings.
2. Select Communications > 802.11 Radio > Funk Security .
3. Select an active Funk security profile to configure.
4. Enter the SSID.
5. For Association, select Open .
6. For Encryption, select WEP .
7. Tap OK .
Select Microsoft as Your Security Choice
The default security setting is Funk. If you want to use Microsoft Wireless Zero
Configuration (WZC) security, you need to select it as your security choice.
1. Tap Start > Settings > System > Enterprise Settings .
2. Select Communications > 802.11 Radio > Security Choice .