Honeywell BW MaxXT II Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 108

background image

CHAPTER

1

Warranty

Limited Warranty and Limitation Liability

BW Technologies by Honeywell LP (Honeywell) warrants the product to be free from defects in
material and workmanship under normal use and service for a period of two years, beginning on
the date of shipment to the buyer. This warranty extends only to the sale of new and unused
products to the original buyer. Honeywell’s warranty obligation is limited, at Honeywell’s option, to
refund of the purchase price, repair or replacement of a defective product that is returned to a
Honeywell authorized service center within the warranty period. In no event shall Honeywell’s
liability hereunder exceed the purchase price actually paid by the buyer for the Product.

This warranty does not include:

a.

fuses, disposable batteries or the routine replacement of parts due to the normal wear and
tear of the product arising from use;

b.

any product which in Honeywell’s opinion, has been misused, altered, neglected or
damaged, by accident or abnormal conditions of operation, handling or use;

c.

any damage or defects attributable to repair of the product by any person other than an
authorized dealer, or the installation of unapproved parts on the product; or

The obligations set forth in this warranty are conditional on:

a.

proper storage, installation, calibration, use, maintenance and compliance with the product
manual instructions and any other applicable recommendations of Honeywell;

b.

the buyer promptly notifying Honeywell of any defect and, if required, promptly making the
product available for correction. No goods shall be returned to Honeywell until receipt by
the buyer of shipping instructions from Honeywell; and

c.

the right of Honeywell to require that the buyer provide proof of purchase such as the
original invoice, bill of sale or packing slip to establish that the product is within the
warranty period.

THE BUYER AGREES THAT THIS WARRANTY IS THE BUYER’S SOLE AND EXCLUSIVE REMEDY
AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. HONEYWELL SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
BASED ON CONTRACT, TORT OR RELIANCE OR ANY OTHER THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or
exclusion or limitation of incidental or consequential damages, the limitations and exclusions of
this warranty may not apply to every buyer. If any provision of this warranty is held invalid or

BW MaxXT II

4

User Manual

«
...
3
4
5
6
7
...
»

Содержание BW MaxXT II













































































































Отзывы:

Нет отзывов

Похожие инструкции для BW MaxXT II

Бренд: First Texas Products Страницы: 2

Z-Lynk Wireless System

Бренд: Garrett Страницы: 24

Бренд: Garrett Страницы: 21

Бренд: Garrett Страницы: 105

Бренд: Elma Instruments Страницы: 32

TrueSafe Gas Cloud

Бренд: Vighnaharta Страницы: 15

TrueSafe TS 21 I-HC

Бренд: Vighnaharta Страницы: 19

Бренд: STATUS SCIENTIFIC CONTROLS Страницы: 110

Бренд: DeepTech Страницы: 18

Gold MAXX Power

Бренд: XP Страницы: 29

DEUS II WS6 MASTER

Бренд: XP Metal Detectors Страницы: 4

Бренд: Oldham Страницы: 36

Бренд: olympia electronics Страницы: 5

Бренд: Dräger Страницы: 284

Бренд: White's Страницы: 20

Бренд: Pilot Communications Страницы: 15

Twin Channel Gas Alarm

Бренд: Pilot Communications Страницы: 19

Бренд: Quintezz Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды