Honeywell Ademco VISTA-21iPSIA, Инструкция по установке и настройке

Страница: 65 / 96

N o t i f y P a n e l O f _
N e i t h e r F a u l t
Notify Panel Of
Appears only if IP & GSM is selected as Internal Device option.
Select from the following choices:
•
Neither Fault
•
Both IP and GSM must fail before fault code is sent (status code 4005 displayed); panel
receives primary and secondary path failure messages. No message sent if only one or the
other path fails.
To scroll the choices: [
∗
] key scrolls forward; [backspace] key scrolls backward
•
[#] to continue
NOTE: IP failure will always be sent to the central station as Primary Path Failure, and
GSM failure will always be sent as Secondary Path Failure.
IP address information prompts
The following prompts appear only if IP or IP & GSM is selected as Internal Device.
It is recommended to use dynamically allocated IP addresses, but if fixed IP addresses are desired, contact your
network administrator for the appropriate information.
NOTE: A valid IP address must be entered in each prompt before the system continues to the next prompt.
Entries cannot be left with the default values.
U s e D H C P Y / N
( Y )
Use DHCP
[Y] = have the IP addresses dynamically allocated (recommended), skip to Review prompt.
[N] = use fixed IP addresses; continue with next prompt
[#] to continue
N I C I P A d d r e s s
2 5 5 . 2 5 5 . 2 5 5 . 2 5 5
NIC IP Address
Enter the 4-part IP address for this device, separating each part with a space ([
∗
] key,
displayed as periods).
[#] to continue
S u b n e t M a s k
2 5 5 . 2 5 5 . 2 5 5 . 2 5 5
Subnet Mask
Enter the 32-bit address mask used to indicate the portion (bits) of the IP address that is
being used for the subnet address, separating each part with a space ([
∗
] key, displayed as
periods).
[#] to continue
G a t e wa y I P A d d r
2 5 5 . 2 5 5 . 2 5 5 . 2 5 5
Gateway IP Addr
Enter the 4-part IP address assigned to the Gateway, separating each part with a space
([
∗
] key, displayed as periods). If unused set to 0.0.0.0.
[#] to continue
D N S I P A d d r
2 5 5 . 2 5 5 . 2 5 5 . 2 5 5
DNS IP Addr
Enter the 4-part IP address assigned to the DNS (Domain Name System) server,
separating each part with a space ([
∗
] key, displayed as periods). If unused set to 0.0.0.0.
[#] to continue
R e v i e w ? Y / N
Review (and Exit
∗∗∗∗
29 Menu mode or Reset Defaults)
You can review the
∗
29 Menu mode options to ensure that the correct responses have been
made. When satisfied with entries, select [N] to exit
∗
29 Menu mode.
To review prompts or exit
∗∗∗∗
29 Menu mode:
[Y] = review prompts and entries, starting with Internal Device. Use the up/down arrow keys to
scroll through the program fields without changing any of the values. If a value requires
change, simply type in the correct value. When the last field is displayed, the
“ REVIEW? ”
prompt again appears.
[N] = Exit *29 menu mode and return to data field programming mode. The prompt briefly
displays “ DONE ” before returning to data field mode prompt “ Enter
∗
or #. ”
[#] to accept Y or N selection (# alone exits same as N)
To reset
∗∗∗∗
29 Menu mode defaults:
Press [ESC] at the Review prompt to display the “Reset Factory Defaults” prompt.
[Y] = reset
∗
29 menu mode options to factory values; if selected, all programmed
∗
29 Menu
mode options are reset to the factory settings
[N] = cancel reset defaults function
Menu Mode Programming
5-23