Honeywell 60 Series, Руководство по настройке

Страница: 68 / 93

Honeywell 60 Series IP Camera Software Configuration Guide
54
The camera has a buffer to temporarily hold data up to a certain limit. Enter a number to
decide how many images to capture before a trigger is activated. Up to 7 images can be
generated.
•
Send post-event images:
Enter a number to decide how many images to capture after a trigger is activated. Up to 7
images can be generated.
For example, if both the Send pre-event images and Send post-event images are set to 7,
a total of 15 images can be generated after a trigger is activated.
•
File name prefix
Enter the text that will be appended to the front of the file name.
•
Add date and time suffix to the file name
Select this option to add a date/time suffix to the file name.
Click
SAVE MEDIA
to enable the settings. The new media server will be automatically
displayed in the Media list. If you wish to add more media options, click
ADD MEDIA
.
Media type - Video clip
Select to send video clips when a trigger is activated.
•
Media name: Enter a name for the media setting.
• Source: Select a video stream as the source of video clip.
•
Pre-event recording
The camera has a buffer to temporarily hold data up to a certain limit. Enter a number to
decide the duration of recording before a trigger is activated. Up to 9 seconds can be set.
•
Maximum duration
Specify the maximum recording duration in seconds. The duration can be up to 10
seconds.
For example, if pre-event recording is set to five seconds and the maximum duration is set
to ten seconds, the camera continues to record for another 4 seconds after a trigger is
activated.
•
Maximum file size
Specify the maximum file size allowed. Some users may need to stitch the video clips
together when searching and packing up forensic evidence.
•
File name prefix
Enter the text that will be appended to the front of the file name.
Click SAVE MEDIA to enable the settings.
Media type - System log
Select to send a system log when a trigger is activated.
Click SAVE MEDIA to enable the settings, and then click CLOSE to exit the page.
In the Event settings tab, the Servers and Medias you configured will be listed. Make sure the
Event Status is set to
ON , in order to enable the event triggering action.