Honeywell 2450Cm Series, Руководство пользователя

Страница: 240 / 276

Performance Series Network Video Recorder User Guide
226
Figure 12-105 Security Configuration Interface
2.
Click to enable Trusted Sites , and only the listed IP addresses can access the NVR.
OR
Click to enable
Blocked Sites
, and the listed IP addresses can NOT access the NVR.
Adding Trusted or Blocked Sites
1.
Click
Add
to open the
Add
configuration interface.
2.
Select
IP Address
,
IP Segment
or
MAC Address
from the drop-down menu.
3.
Select
IPv4
or
IPv6
from the drop-down menu. This option is not available if
MAC Address
was selected in step 2.
4.
Enter the IP address or MAC address in the address field (depending on what option you
selected in step 2).
5.
Click
OK
.
Automatic Maintenance
1. Click Auto Maintenance under SYSTEM to open the Auto Maintenance configuration
interface.
Figure 12-106 Auto Maintenance Configuration Interface
2. Select when the NVR automatically reboots, both day and time (or Never).
3. Click OK to save the new settings.