Honeywell Home Ademco Vista Series, Руководство пользователя

Страница: 31 / 64

27
Paging Feature (Continued)
About Manual Paging
Your system may be set up so you can manually send a message to up to four (VISTA-20P Series) or two
(VISTA-15P Series) pagers.
• Your installer programs the paging function key and the pager phone numbers.
• Pressing the paging keys sends the message
9 9 9 – 9 9 9 9
to the selected pager.
• This message could mean “call home”, “call your office”, or any other prearranged meaning.
• See the Paging chart at the back of this manual for details of the paging setup for your system.
1. Press and hold the programmed Paging Key for at least
2 seconds (wait for beep), then press the pager number
(1-4)* representing the pager intended to receive the
message.
2. The recipient, on seeing the 999–9999 message, will
understand the prearranged meaning of this signal.
*
If no number is pressed, the message is sent to pager 1
.
Pagers 1-4 for VISTA-20P Series; 1-2 for VISTA-15P Series.
Alpha Display:
∗∗∗∗
DISARMED
∗∗∗∗
READY TO ARM
Fixed-Word Display: READY
999-9999
Pager Display
Latch Key Paging
You can program a schedule that causes a pager report to be sent if the system is not DISARMED by the
scheduled time (see Scheduling section, event “03”). For example, a working parent might want a
message to be sent to a pager if their child did not arrive home from school and disarm the system by a
certain time.
If programmed, the message that is sent is:
7 7 7 – 7 7 7 7 .