8
Functions of the Keypads
(Continued)
NOTE:
The functions printed directly on the keys
indicate their primary purpose; the functions
printed under some of the keys (shown in brackets
under the respective key), indicate their alternate
or secondary purpose.
1.
DISPLAY WINDOW
Alpha Display Keypads:
2-line, 32-
character Liquid Crystal Display (LCD)
keypads that display protection point
identification, system status, and
messages.
Fixed-Word Display Keypads:
Display protection zone ID and system
status messages using pre-designated
words in the LCD display area.
2.
1
OFF
Disarms burglary portion of the
system, silences alarms and audible
trouble indicators, and clears visual
display after problem's correction.
[RECORD]
On Voice keypads, used in
conjunction with the FUNCTION and
VOICE keys to record up to a 2.5-minute
message.
3.
2
AWAY
Arms the entire burglary
system, perimeter and interior.
[VOLUME]
On Voice keypads, used in
conjunction with the FUNCTION and
desired volume control keys
↑
[3] or
↓
[6]
to adjust the volume of a recorded
message or voice system status.
4.
3
STAY
Arms perimeter portion of
burglary system only. Interior protection is
not armed, allowing movement within
premises without causing an alarm. If
pressed twice in succession, arms
system in Night-Stay mode.
[PLAY]
On Voice keypads, used in
conjunction with the FUNCTION and
VOICE keys to play the recorded
message.
[
↑
]
On Voice keypads, used in
conjunction with the FUNCTION and
VOLUME keys to raise the message and
voice system status volume.
5.
4
MAX
Arms the entire burglary
system, perimeter and interior, but
without entry delay feature. Entering via
an entry/exit door will cause an alarm.
6.
5
TEST
Tests the system and alarm
sounder if disarmed. Refer to
Testing The
System
section for test procedures.
7.
6
BYPASS
Removes individual
protection zones from being monitored by
the system.
[
↓
]
On Voice keypads, used in
conjunction with the FUNCTION and
VOLUME keys to lower the message and
voice system status volume.
8.
7
INSTANT
Arms in manner similar to the
STAY mode, but without the entry delay
feature.
Entering via an entry/exit door will cause
an alarm.
9.
8
CODE
Used to assign additional
security codes and attributes for other
users of the system.
10.
9
CHIME
Turns CHIME mode on and off.
When on, the opening of windows or
doors while the system is disarmed will
sound 3 beeps at the keypad(s).
Содержание Ademco Vista Series
Страница 62: ...58 NOTES...
