Honda tourer, Руководство пользователя

Страница: 540 / 581

This indicator will also come on and
you cannot restart the engine after
your vehicle has run out of fuel. If
this occurs, refuel the fuel tank, then
follow the procedure for
on page before
attempting to restart the engine.
The indicator may come on along
with the glow plugs indicator if the
emissions control systems have
several problems.
If you keep driving with the
malfunction indicator lamp on, you
can damage your vehicle’s emissions
controls and engine. Those repairs
may not be covered by your vehicle’s
warranties.
This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. If it
comes on at any other time, or if you
see the symbol ‘‘
’’ or the
symbol with a ‘‘CHECK SYSTEM’’
message on the multi-information
display, it indicates one of the
engine’s emissions control systems
may have a problem. Even though
you may feel no difference in your
vehicle’s performance, it can reduce
your fuel economy and cause your
vehicle to put out excessive
emissions. Continued operation may
cause serious damage.
You should also have the dealer
inspect your vehicle if the indicator
comes on frequently, even though it
goes off when you follow the above
procedure.
If this indicator comes on, safely pull
off the road and turn off the engine.
Restart and turn off the engine at
least three times at intervals of
approximately 30 seconds, then
watch the indicator. If it stays on,
have your vehicle checked by your
dealer as soon as possible. Drive
moderately until the dealer has
inspected the problem. Avoid full-
throttle acceleration and driving at
high speed.
488
Taking Care of the Unexpected
Malfunction Indicator Lamp (Diesel models)
Priming
the Fuel System
537
MALFUNCTION INDICATOR LAMP
06/09/21 11:06:44 32SED640_540