Use a wrench to remove the bolt
holding the ignition coil. Pull the
ignition coil up slightly.
Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
Remove the spark plug with a 16
mm (5/8 inch) spark plug socket.
Remove the ignition coil.
Torque the spark plug. (If you do
not have a torque wrench, tighten
the spark plug 2/3 of a turn after it
contacts the cylinder head.)
Tightening torque:
Put the new spark plug into the
socket, then screw it into the hole.
Screw it in by hand so you do not
crossthread it.
3.
4.
5.
6.
7.
8.
Maintenance
Spark Plugs (Petrol models)
450
CONNECTOR
IGNITION COIL
LOCK TAB
BOLT
18 N·m (1.8 kgf·m , 13 lbf·ft)
06/09/21 10:54:50 32SED640_453
Содержание tourer
