Honda MBX50, Руководство по ремонту

Страница: 15 / 194

{;;jJ\
HONDA
� MBX50· MBXSO
LUBRICATION_
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• Use utmost care when remvoing and installing the oil pump to keep dust and dirt from entering the engine.
e
Do not attempt to disassemble the oil pump.
e Bleed air from the oil pump if there is air in the oil pipe from the oil tank to the oil pump or if the oil pipe has been dis­
connected.
e
Bleed air from the oil pass tube (from the oil pump to the inlet pipe) if the tube has been disconnected.
SPECIFICATIONS
INJECTOR OIL
Oil capacity
Oil recommendation
TRANSMISSION OIL
Oil capacity
Oil recommendation
1.2 lit. (1.3 US qt, 1.1 Imp qt)
Honda 2 Stroke Injector Oil or its equivalent
0.9 lit. (1.0 US qt, 0.8 Imp qt) at disassembly
0.8 lit. (0.8 US qt, 0.7 Imp qt) at change
Use HONDA 4-STROKE OIL or OIL VISCOSITIES
equivalent.
API SERVICE CLASIFICATION:
SE or SF
VISCOSITY: SAE 10W-40
-JO � 10 -10
10 20 JO 40
�c
TORQUE VALUES
Oil pump mounting bolt
Oil pump mounting screw
8-12 N.m (0.8-1.2 kg-m, 6-9 ft-lb)
8-12 N.m (0.8-1.2 kg-m, 6-9 ft-lb)
TROUBLESHOOTING
Excessive smoke/excessive carbon buildup in plug
1. Pump not properly synchronized (excessive oil)
Sized or burnt piston
1. No oil in tank or clogged oil pipe
2. Low quality of engine oil
2. Pumpt not properly synchronized (insufficient oil)
3. Air in oil pipe
Overheating
1. Oil pump not synchronized properly (!insufficient oil)
4. Defective oil pump
2. Low quality of engine oil
Oil not flowing out from tank
1. Clogged oil tank cap breather hole
2. Clogged oil tank filter screen
2-2