page 17
©
Suncast Corporation
Step 70: Lay out wall components
following diagram on previous
page.
Step 69: Mark location of wall
studs on top and bottom plate fol-
lowing diagram on previous page.
Step 71: Fasten wall components together using 3-1/4” nails.
Wall Assembly - without window
Note: The side walls are interchangeable and can be configured according to your preference.
Step 66: Locate the four corner braces and insert one 3” screw into each pre-drilled hole as shown.
Step 67: Align the corner brace flush with the top and side edges of
end wall stud, and attach.
Step 68: Repeat at each corner of
the building.
