33
More than one actuator taught on a button:
Scene symbol, hourglass, "OK"
The hourglass indicates that a command or a command se-
quence is still being processed and feedback is awaited. The
arrows in the display show a direction of movement or the direc-
tion for a value change: Open/Close, Increase/Decrease.
The display switches into dormant state after 30 seconds of be-
ing inactive and "HM" is shown on the display as is configured in
the factory.
The messages on the display are in English (German) as default.
The display language can be chosen through the Central how-
ever.
8
Resetting to factory status
Hold the teach button down for at least 5 seconds. The device
LED starts to flash slowly in red. (If you want to abort the reset
procedure at this time, you can press the teach button briefly
again or wait 15 seconds. In either case, the flashing red will
stop.)
To reset the device, press the teach button again for at least 5
seconds. The LED now starts to flash in red faster while holding
the button down and "RESET" is shown on the display. Releasing
the button completes the reset procedure and the LED is illumi-
nated for approx. 3 seconds to confirm the reset operation.
Possible error messages:
(This error can occur now if you have a Central and have
taught the device for this Central.)
If the LED does not start flashing after holding the button down
for 5 seconds but is illuminated continuously, the device cannot
be reset! In this case, the encoding is active using a system
security key that differs from the key delivered with the system.
