31
seconds when the remote is shocked or if a button is pressed.
The time is extended by 5 seconds each time a shock is regis-
tered or a button is pressed while the background is illuminated.
Do not carry the remote control in a pocket or laying
in your vehicle. Accidentally switching the background
lighting on consumes power and reduces the time
between charging batteries!
7.2
Device LED feedback
The feedback signals apply for operation with and without the
center.
No actuators have been taught yet:
Brief press of the button: LED is illuminated in orange for 1
second,
Extended button press: LED is illuminated in orange for 1
second,Button held down: LED is illuminated as long as the but-
ton is pressed and goes dark afterward.
Actuators are taught:
Brief/long press of the button: LED is illuminated in orange as
long as the function transfer requires, this time depends on the
number of actuators that have been taught for this button, the
number of required transmission attempts and the encoding and
transmission mode. After the radio transmission is complete, the
LED is illuminated in either red or green for 1 second.
Green: all actuators have confirmed the (last) bi-directional com-
mand,
Red: at least one actuator has confirmed the (last) bi-directional
command.
Button held down: LED is illuminated in orange as long as the
button is held down and behaves as above afterward Button held
down (receiver with burst transmission mode): Orange as long
as transmitting, then feedback indicated with 1 second in red or
