28
The charge status display on the remote control display
only shows the correct charge status if the rechargeable
batteries in the remote control have been completely
charged in the charging station one time. If rechargeable bat-
teries have been charged elsewhere and are then inserted in
the remote control, the status indicator indicates low batteries.
This effect disappears if the remote control has been completely
charged in the charging station one time.
6.2
Teaching
Please read this section completely before starting with any
teaching!
The remote control supports three different modes
• Operation mode (normal operation)
• Configuration mode (for changing remote control para-
meters)
• Teach mode (Teaching HomeMatic components)
Training requires that both devices to be connected are put into
teach mode and the desired channel is selected for training.
You can teach the eight button pairs of the remote
control directly on the HomeMatic actuators. The three
special buttons located on the side are only functional in
combination with the HomeMatic Central.
The teach button is on the back of the hand transmitter at the
right over the battery compartment cover. This button is located
within a recess in the housing so that it cannot be pressed ac-
cidentally.
