1
1
5
5
COMMAND_CLASS_CLOCK
Upon power up, allow 10 seconds for the RC-90BZ thermostat to initialize. After 10 seconds, a controller can
set the time of the internal clock
INTEROPERABILITY WITH Z-WAVE™ DEVICES
A Z-Wave™ network can integrate devices of various classes, and these devices can be made by different
manufacturers. The RC-90BZ thermostat can be incorporated into existing Z-Wave™ networks. All listening
Z-Wave nodes act as repeaters regardless of vendor.
OWNER'S MANUAL
Following Installer Setup, check the option boxes (
) in the Owner's Manual according to the configuration of
the thermostat.
FCC NOTICE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
