EngliSH | 29
BA V2.0 01052020
Another option is to send a data set to the HOMA server.
These data sets can then be made available to all service
and commissioning personnel.
7.3.4. Service
•
This menu item was created especially for service staff.
Here you will find all relevant information from the PCM
that may be useful for service and maintenance work.
Display of events
Here, the most recent events (50) are displayed in a list
with their date and time. All events are recorded with „oc-
curred“ and „retreated“
Display of faults
The fault list contains all faults (50) with their date and
time. This is an extract from the „Events“ list. For the
sake of clarity, all faults are only shown with „occurred“
Station data set
The entire data set in the station is displayed here
Pump 1 (values cannot be reset)
•
Number of operating hours in h
•
On/off cycles
Pump 2 (values cannot be reset)
•
Number of operating hours in h
•
On/off cycles
Service
•
Selectable service time interval in d (days)
•
Activate service signal – yes/no
•
Display of days until next service (can be reset)
•
Change password
Sensor calibration
Here, the level sensor (dynamic pressure or 4-20 mA) can
be calibrated. Only required if a level other than 0 is dis-
played when the probe is not submerged.
Procedure: Remove the pitot tube or probe from the wa-
ter. „Calibrate“ > the level must then show „0“.
Service signal
Display of days until next service (can be reset)
Change password
Here, you can change the factory-set password.
7.3.5. Station status (saved)
As with the saved data sets, a list of the saved station
statuses can be seen here. The station status can there-
fore be received locally from the controller (if no internet
connection is available) and forwarded later by email.
7.3.6. Settings
The following settings can be made in this menu:
Language: English or German
Download data set (from HOMA server)
•
WiFi only – yes/no
•
How often to download data set
•
At each start
•
Daily
•
Weekly
•
Monthly
•
Never
Privacy
Transfer anonymous usage data – yes/no
This menu contains the following information:
Help: please refer to the detailed description in HOMApp
Support contact details
7.3.7 Help
This menu contains the following information:
•
Help: please refer to the detailed description in HO-
MApp
•
Support contact details
•
Site notice
•
Documents
•
Contact details for queries
Содержание PCM Series
Страница 15: ...DEUTSCH 15 BA V2 0 01052020 11 Anhang ...
Страница 31: ...EngliSH 31 BA V2 0 01052020 11 Appendix ...
Страница 34: ......
