Holzstar FKS 315-2000 E, Руководство по эксплуатации

Страница: 21 / 34

Disposal, recycling of old equipment
FKS 315-2000 E | Version 1.11 21
Fig. 53: Align sliding carriage
Step 4: Move the sliding carriage to an end position and
use a precision ruler to measure the distance
from the end position to the mark on the saw
blade.
Step 5: Move the sliding carriage to the other end posi-
tion and use a precision ruler to measure the di-
stance from the end position to the mark on the
saw blade.
Move the sliding carriage to the other end position and use
a precision ruler to measure the distance from the end po-
sition to the mark on the saw blade.
Fig. 54: Adjust carrier of sliding carriage
Step 6: Push the adjustable end of the sliding carriage in
front of the saw blade.
Step 7: Loosen the two hexagon screws and adjust the
slide carriage accordingly to equalize the gap un-
til it is the same size at both end points.
Step 8: Tighten the hex screws to lock the carrier. Tigh-
ten the screws that secure the sliding carriage to
the housing.
10 Disposal, recycling of old
equipment
In your own interests and in the interests of the environ-
ment, please ensure that all components of the machine
are disposed of in the proper and approved way.
10.1Decommissioning
Disused machines must be decommissioned immedi-
ately to prevent misuse at a later point and putting the
environment or persons at risk.
Step 1: Remove all environmentally hazardous process-
ing materials from the used machine.
Step 2: If necessary, disassemble the machine into as-
semblies and components that are easy to han-
dle and suitable for recycling.
Step 3: The machine components and processing mate-
rials must be disposed of using the intended dis-
posal methods.
10.2Disposal of electrical equipment
Note that electrical equipment contains a variety of recy-
cling-capable materials and also environmentally haz-ar-
dous components. Please help to separate these compo-
nents and dispose of them responsibly. In case of doubt,
contact your local waste disposal authority. Consult a spe-
cialist disposal agent for recycling if needed.
10.3Disposing of lubricants
Lubricant manufacturers provide disposal information for
the lubricants used. If necessary, request product-speci-
fic data sheets.
10.4Disposal via municipal collection
points
Disposal of used electrical and electronic equipment
(Applicable in the countries of the European Union and
other European countries with a separate collection sys-
tem for these appliances).
The symbol on the product or its packaging indi-
cates that this product should not be treated as normal
household waste, but must be returned to a collection
point for the recycling of electrical and electronic equip-
ment. By helping to properly dispose of this product, you
are protecting the environment and the health of others.
Environment and health are endangered by improper
disposal. Material recycling helps to reduce the con-
sumption of raw materials. For more information about
recycling this product, contact your local community, mu-
nicipal waste management, or the shop where you pur-
chased the product.
sawblade
sliding table
Mitred slot