Holzstar FKS 315-2000 E, Руководство по эксплуатации

Страница: 7 / 34

Technical Data
FKS 315-2000 E | Version 1.11 7
4 Technical Data
4.1 Type plate
Fig. 5: Type plate FKS 315-2000 E
5 Transport, Packaging, Sto-
rage
5.1 Delivery and transport
Delivery
Check the panel saw for visible transport damage after
delivery. If you discover any damage to the panel saw,
immediately report it to the transport company or the de-
aler.
Transport
Improper transport is accident-prone and can cause da-
mage or malfunctions for which we do not grant any liabi-
lity or guarantee.
Transport the scope of delivery secured against shifting
or tilting with a sufficiently dimensioned industrial truck to
the installation site.
Model FKS 315-2000 E
Length 4330
Width / Depth [mm] 4155
Height [mm] 1150
Extension table [mm] 440 x 800
Rear extension table [mm] 310 x 500
Sliding table [mm] 2000 x 270
Sliding table [mm] 680 x 580
Telescopic stop [mm] 1200-2200
Saw blade diameter Ø 315 mm
Speed (Saw blade) 4500 min-1
Max. Cutting depth at 90° 100 mm
Max. Cutting depth at 45° 80 mm
Max. Cutting length with
Sliding table 2000 mm
Max.Cutting width (saw blade up
to rip fence) 1220 mm
Weight 275 kg
Noise level idle 85 dB(A)
Suction
Blade guard
Machine
Ø 38 mm
Ø 100 mm
Min. Suctioning 20 m/s
Extraction volume
Blade guard
Machine
140 m
3
/h
690 m
3
/h
WARNING!
Severe or fatal injuries may occur if parts of the
machine tumble or fall down from the forklift truck,
pallet truck or from the transport vehicle. Follow the
instructions and information on the transport box.
Note the total weight of the machine. The weight of
the machine is indicated in the "Technical data" of the
machine. When the machine is unpacked, the weight
of the machine can also be read on the rating plate.
Only use transport devices and load suspension gear
that can hold the total weight of the machine.
WARNING!
The use of unstable lifting and load suspension
equipment that might break under load can cause
severe injuries or even death. Check that the lifting
and load suspension gear has sufficient load-bea-
ring capacity and that it is in perfect condition.
Observe the accident prevention regulations issued
by your Employers Liability Insurance Association or
other competent supervisory authority, responsible
for your company.
Fasten the loads properly.