Holzstar 5902030, Руководство по эксплуатации

Страница: 13 / 32

Setting up and connection
FKS 250-1300 | Version 1.04 13
Step 2: Using the handle, loosen the screw to guide the
parallel stop and slide the parallel stop into the
screw of the carrier.
Fig. 14: Mount rip fence on carrier
Step 3: Tighten all handles to securely lock the rip fence.
Fig. 15: Tighten rip fence
Mount angle stop
Step 1: Insert the angle stop into the groove provided on
the sliding table and tighten it with the help of the
clamping lever.
Fig. 16: Mounting the angle stop
Mount the swivel arm
Step 1: Screw the swivel arm to the housing of the ma
-
chine with 4 hexagon screws. The swivel arm
must be aligned horizontally.
Fig. 17: Mount swivel arm
Step 2: Place the sliding table support (A) in the swivel
arm and hand tighten the nuts. The carrier still
needs to be set up. After aligning, tighten the
nuts.
Fig. 18: Mount sliding table carrier
Step 3: Mount the sliding table support (A) on the sliding
carriage. Secure the sliding table support to the
carriage with the 2 screws. Attach the carriage to
the saw with the help of the 2 clamping levers
and screws.
Fig. 19: Mount the sliding carriage on the sliding table support
Step 4: Place the telescopic stop on the sliding carriage
and secure it with the help of the clamping le
-
vers.
A