Holzstar 5902030, Руководство по эксплуатации

Страница: 6 / 32

6 FKS 250-1300 | Version 1.04
Safety
2.5 Safety markings on the panel saw
The following safety markings are attached to the panel
saw (Fig. 1), which must be observed and followed.
Fig. 1: safety information | 1 Danger warning | 2 Warning of dangerous
| electrical voltage | 3 Warning of risk of injury for | the upper limbs |
4 grounding symbol | 5 security | hints
If safety labels on the machine are damaged or missing,
this can cause errors, personal injury and material da-
mage. The safety symbols attached to the machine must
not be removed. Damaged safety symbols must be re-
placed immediately.
As soon as the signs are not clearly visible and compre-
hensible at first glance, the machine must be stopped
until new signs have been attached.
2.6 General safety instructions
This machine is equipped with various safety devices de
-
signed to protect both the operator and the machine. Ho
-
wever, this can not yet cover all safety aspects and thus
the responsibility of the operator. Before putting the ma
-
chine into operation, you must read this chapter and fully
understand it. In addition, the operator must also consi
-
der other aspects of the hazard in terms of environmen
-
tal conditions and material.
Please note the following:
Before connecting the device to the mains, make sure
that all safety devices are in place. If possible, check
their operation. If it is necessary to remove the doors or
protective covers, switch off the switch and pull the plug
out of the socket.
- The backstops must be freely movable and their
function must be checked regularly (several times
a day).
- Do not connect the device to the mains when the
door or protective cover has been removed.
- To avoid improper operation, you should familiarize
yourself with the location of the switches before
switching on the machine.
- Memorize the position of the emergency stop button
so that you can use it immediately at any time.
- Be careful and do not touch any switches while the
machine is in operation.
- Never touch a rotating tool with your hands or other
objects.
- If you are not working on the machine, switch the
device off at the switch and pull the plug out of the
socket.
- Do not modify the machine in a manner that poses
a risk to safe operation.
- If in doubt about the correctness of your procedure,
contact a responsible person.
- Do not neglect to carry out regular inspections ac
-
cording to the instructions for use.
- Check and make sure that there are no user-rela
-
ted malfunctions on the machine.
- After the work is done, set the machine to be ready
for another pass.
- Should a power failure occur, switch off the ma
-
chine immediately.
- Do not paint, dirty or damage the safety sheets.
- Do not modify or remove the safety plates.
- Keep the work area free. Overcrowded areas and
workbenches cause injury.
- Consider the environment of the workspace.
- Do not expose tools to rain.
- Do not use tools in humid or wet environments.
- Make sure the workspace is well lit.
- Do not use tools in the presence of flammable li
-
quids or gases.
- Before starting to work, take items such as Rings,
watches, bracelets, neckties, etc., as these can get
stuck on different parts of the machine and get
caught.
- Protect and fix your hair properly so as to avoid
catching it with moving parts on the machine.
- Wear shoes that are recommended or required by
the health and safety regulations of all countries.
- Always wear the necessary safety equipment
(safety goggles, apron, safety shoes, ear protec
-
tion, etc.).
- If there are obstacles above your head - in the work
area - wear a helmet.
- Always wear a protective mask while working on
material that will generate dust during the process.
- Never wear loose work clothes.
2
3
4
1
5