Holzstar 5902030, Руководство по эксплуатации

Страница: 18 / 32

18 FKS 250-1300 | Version 1.04
Operation of the panel saw
Fig. 27: Necessary number of teeth engaged
- Always use a well sharpened blade without de
-
fects.
- Clean the saw blades with the appropriate means.
- Clean the saw blades with a metal brush.
8.2 Installation of a new saw blade
Make sure that the mounting diameter of the saw blade
is the same as the diameter of the mounting axle. Never
insert a saw blade with a mounting diameter larger than
the axis diameter of the machine mount.
8.3 Basic applications of the sliding table saw
If the wood is cut with the grain, use the rip fence for this
application.
Fig. 28: Slitting the workpiece
Cutting across the grain
If the wood is cut across the grain, use either a miter
fence or a sliding carriage for this application.
Fig. 29: Cross cutting the workpiece
Cut beveled edge
If a beveled (angled) edge to the workpiece is needed,
proceed as follows:
Step 1: Tilt the saw blade.
Step 2: Pass the wood in a cut.
Fig. 30: Cut beveled edge