Holzstar 5902030, Руководство по эксплуатации

Страница: 12 / 32

12 FKS 250-1300 | Version 1.04
Setting up and connection
Fig. 8: Mount the workbench
Step 2: Loosely screw on the lateral extension table on
the side of the saw table, align and center it,
and then tighten the screws underneath the ta
-
ble. Check the centering at the corners and the
flat alignment of the surface on the main table
with the aid of wooden blocks and spirit level,
then tighten all screws of the worktable.
Fig. 9: Mount extension table
Step 3: Unscrew the 3 screws (Fig.10) on the workbench
of the saw to assemble the butt table. Now
mount the table to the saw and tighten the
screws again.
Fig. 10: Mount rear extension table
Mount the measuring scale
Step 1: Mount the measuring scale to the holes on the
front of the machine using the screws. Make
sure the scale is up.
Fig. 11: Mount measuring scale
Mount the stop guide rail
Step 1: Insert 4 M10x80 hex bolts into the main table and
the extension tables. Loosely screw on 2 nuts on each
hexagon screw
Step 2: Screw the four screws into the stop guide rail
approx. 4 - 5 turns
Fig. 12: Mount the stop guide rail
Mount rip fence
Step 1: Loosen the star knobs of the rip fence and push
the carrier onto the guide rail.
Fig. 13: Sliding the carrier onto the guide rail