Holzmann KMP 13, Руководство пользователя

Страница: 14 / 19

GUARANTEE
HOLZMANN Maschinen Austria  www.holzmann-maschinen.at Seite 14
Metalldrehbank/Metal turning lathe ED1000F
12 TROUBLE SHOOTING
Disconnect the machine from the power supply prior to any checks performed
at the machine itself !
Trouble Possible cause Solution
Motor does not
start
 No power.
 Fuses were blown or breaker
tripped.
 Overheating relay tripped.
 Check power supply.
 Change fuse or re-set breaker.
 Re-set relay.
Motor stop
during opera-
tion.
 Fuses blown out or breakers tripped.
 Overheating relay tripped.
 Control circuit malfunction.
 Pump blocked by foreign objects.
 Change fuse or re-set breaker.
 Re-set relay.
 Re-set control circuit.
 Remove foreign objects.
Pump gives
unstable flow
 Pump impeller blocked by foreign
objects.
 Insufficient coolant fluid level.
 Enter power current not stable.
 Remove foreign objects.
 Add coolant liquid.
 Add power stabilizer behind the
enter power.
Pump in opera-
tion but no
flow
 Filterable mesh blocked by foreign
objects.
 Low coolant level.
 Incorrect rotating direction.
 Remove foreign objects.
 Add coolant circulating liquid..
 Re-check power connection.
12.1 Disposal
Do not dispose of the TS 200 / 250 in residual waste. Contact your local authorities
for information regarding the available disposal options. When you buy at your local
dealer for a replacement unit, the latter is obliged to exchange your old