Holzmann KMP 13, Руководство пользователя

Страница: 13 / 19

GUARANTEE
HOLZMANN Maschinen Austria  www.holzmann-maschinen.at Seite 13
Metalldrehbank/Metal turning lathe ED1000F
6) Check the pipe line of the circulating liquid to remove and prevent any possible blockage by
foreign objects.
11 OPERATION AND MAINTENANCE
Keep the pump surroundings clean and to avoid liquid splash.
Otherwise; hazard may occur due to power conduct or power leakage caused by other reasons.
Filterable Mesh
The filterable mesh enclosed in tank, should always be kept clean to
assure no any foreign objects block the filter for the best performance.
Periodic Examination
The following checklists should be carried out periodically to ensure normal operation.
 Check the flow of the coolant and the discharge pressure.
 Check whether piping and connectors are leaking.
 Check if there is sediment at tank bottom.
 Check whether the liquid of the tank is in proper level.
If level is high, reduce liquid. If level is too low, fill in liquid.
Pumps can not be used to transfer explosive liquids. Extra protective device is required if the
coolant liquid temperature exceeds 55
℃
to avoid scald hazard.
The pump should not be used to transfer toxic or contaminated liquid. Service and maintenance
will not be provided, if the pump application is not in compliance with the installation and opera-
tion procedures. The user must take the responsibility for any damages or human injury.