Holzmann KMP 13, Руководство пользователя

Страница: 10 / 19

GUARANTEE
HOLZMANN Maschinen Austria  www.holzmann-maschinen.at Seite 10
Metalldrehbank/Metal turning lathe ED1000F
8 TECHNICAL DATA
8.1 Installation
The motor surface temperature (including room temperate) can rise up to 50
℃
. It must be
mounted in a safe place to avoid getting burned by accidental touch.
8.2 Mounting Position
The pumps must be mounted in a vertical position. Upside down,
Tilted or transverse positions are not allowed. (As shown in fig. 1)
Installation is simply done by placing the pump into the hole on the tank top, and fixed by
four bolts in mounting flange.
(As shown in Fig. 2.)
Fig. 1. Fig. 2.
8.3 Submersed Depth
Should avoid objects flow into pump body with liquid and results in pump damage during op-
erating. The lowest pump submerged depth no exceeding the four bolts fixed position at
the bottom cap flange. (As shown in Fig. 3). In addition, a minimum 20mm tolerance be-
tween pump end cover and tank bottom is required to allow for sediment build up. Periodi-
cally clean the tank to remove the sediment is necessary to maintain normal operation.
Liquid Temperature: +0° ~ +88°C
Ambient Temperature: Max. +55°C
Enclosure Class: IP54