OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
29
ZX40PC
Fill in Gear Box Oil
Remove screw (1). Fill with oil until the oil sight glass is filled to
the middle. Machine head must be in vertical (0°) position.
Reassemble screw (1).
Check oil level regularly and fill up gear oil if necessary!
Fill in coolant
The coolant can be filled at the base at the two marked points (1,2) -
see picture on the left.
17.2
Operating the Machine
W A R N I N G
Danger due to electrical voltage! Handling the machine with the power supply up
can lead to serious injuries or even death. Always disconnect the machine from the
power source before carrying out any adjustment or conversion work and secure it
against unintentional restart!
C A U T I O N
Before changing any tools, stop the spindle, wait for all machine parts to come to a
standstill and secure the machine against unintentional restart..
17.2.1
Starting the Machine
N O T E
For the machine to be started, the EMERGENCY
STOP switch (3) must be unlocked, the spindle
protection must be closed and the direction of
rotation (2) as well as the operation mode (4)
must be selected!
To start the machine press the ON-button (1).
