PREFACE (EN)
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
22
ZX40PC
PREFACE (EN)
Dear Customer!
This operating manual contains information and important notes for the safe start-up and
handling of the gear driven drill machine ZX40PC, hereinafter referred to as "machine".
The manual is part of the machine and must not be removed. Keep it for later use in a
suitable place, easily accessible to users (operators), protected from dust and moisture,
and enclose it with the machine if it is passed on to third parties!
Please pay special attention to the chapter Safety!
Due to the constant further development of our products, illustrations and contents may differ
slightly. If you notice any errors, please inform us.
Technical changes reserved!
Check the goods immediately after receipt and make a note of any complaints on the
consignment note when the delivery person takes them over!
Transport damage must be reported separately to us within 24 hours.
HOLZMANN MASCHINEN
cannot accept any liability for unnoticed transport damage.
Copyright
© 2019
This documentation is protected by copyright. All rights reserved! In particular the reprint, the
translation and the removal of photos and illustrations will be prosecuted.
The place of jurisdiction shall be the Regional Court of Linz or the court responsible for 4170
Haslach.
Customer Service Address
HOLZMANN MASCHINEN GmbH
4170 Haslach, Marktplatz 4
AUSTRIA
Tel +43 7289 71562 Dw 0
Fax +43 7289 71562 Dw 4
