SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
23
ZX40PC
SAFETY
This section contains information and important notes on safe start up and handling of the
machine.
For your own safety, please read these operating instructions carefully before start-up.
This will enable you to handle the machine safely and prevent misunderstandings as
well as personal injury and damage to property. Also observe the symbols and
pictograms used on the machine as well as the safety and danger information!
14.1
Intended Use of the Machine
The machine is intended exclusively for the following activities: For drilling and milling metal or
materials with physical properties similar to metal, within the specified technical limits.
HOLZMANN MASCHINEN
assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
14.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
max. 80% (at 20° C)
max. 50% (at 40° C)
Temperature (Operation)
+5° C to +40° C
14.1.2
Prohibited Applications / Hazardous Misapplications
Operating the machine without adequate physical and mental aptitude
Operating the machine without knowledge of the operating instructions.
Operating the machine outdoors.
Operating the machine without sufficient oil/lubrication.
Operating the machine in a working environment with gases, vapours etc. which could
attack, corrode or destroy the insulation of the electronic components.
Operating the machine in a working environment where vibrations occur regularly as they
reduce the performance, accuracy and life of the machine.
Operating the machine in a potentially explosive environment (machine may produce
ignition sparks during operation).
Machining flammable and explosive materials (e.g. pure aluminium, magnesium, etc.).
Operating the machine outside the limits specified in these instructions.
Remove the safety markings attached to the machine.
Modify, bypass or disable the safety devices and safety devices of the machine.
Changes to the design or electrical system of the machine.
..
The improper use or disregard of the instructions given in this manual will void all warranty and
damage claims against Holzmann Maschinen GmbH.
14.2
User Requirements
The machine is designed for operation by one person. The physical and mental suitability as well
as knowledge and understanding of the operating instructions are prerequisites for operating the
machine. Persons who, because of their physical, sensory or mental abilities or their inexperience
or ignorance, are unable to operate the machinery safely must not use it without the supervision
or instruction of a responsible person.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.
