ASSEMBLY
29
WP20ECO | WP30ECO
WP30ECO
Place the frame parts on a flat surface.
Fix base supports (4 x 2), base cross supports (5 x 2)
and side braces (6 x 4) with screws (B x 20), washers
(I x 20), spring washers (G x 20) and nuts (E x 20) as
shown to the posts (1 x 2).
Connect and fix the upper cross beam (2) with
screws (A x 8), washers (H x 8), spring washers (F x 8)
and nuts (D x 8) to the post (1 x 2).
Connect the compressed air hose (10) to the
pneumatic unit (11a).
Fix the hydraulic pump (11) with screws (C x 4) and
washers (J x 4)) on the post (1).
Unscrew the fixing ring (12a) from the pressure
cylinder (12).
Slide the pressure cylinder (12) between the upper
cross beam into the mounting plate as shown and
fix it with the fixing ring.
