HOLZMANN MASCHINEN TS315F1600, Руководство пользователя

Страница: 41 / 58

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 41
TS315F1600
15.3 Notes on using the panel saw
15.3.1 Selection of the saw blade
Apart from the material of the workpiece, the saw blade teeth play the most important role in
achieving precise cuts. The number of teeth, as well as their shape, arrangement and position
are associated with a specific function. To enhance the cutting quality, make sure that at least
2-3 teeth cut through the workpiece at the same time:
adequate saw blade inadequate saw blade
Only work with well-sharpened saw blades.
 Use the push stick at the end of cutting when the distance between the saw blade and
the ruler is less than 120 mm.
 Überzeugen Sie sich, dass die Maschine ohne Vibrationen arbeitet.
 Cracked and deformed saw blades cannot be repaired. They must be sorted out imme-
diately as scrap and replaced by proper ones.
 Feed the workpiece evenly, without thrusts and without taking it back, until the end of
cutting is reached.
15.3.2 Cross-cutting of workpieces made of solid wood
When performing this operation, the following equipment shall be used for safe working:
 The table extension
 Rip-fence and/or outrigger-table + cross-cut-fence
 the guard of the saw blade
 the riving knife
 the hold-down
 the insert in the table
 push stick when cutting small workpieces (distance between saw blade and fence
<120mm)
N O T I C E
When cross-cutting round timber, a template or a holding device is necessary to
secure the workpiece against twisting and the use of a suitable saw blade is neces-
sary.
15.3.3 Cutting boards
When performing this operation, the following equipment shall be used for safe working:
 The table extension
 Rip-fence and/or outrigger-table + cross-cut-fence
 the guard of the saw blade
 the riving knife
 the hold-down
 the insert in the table
 push stick when cutting small workpieces
 (distance between saw blade and fence <120mm)