HOLZMANN MASCHINEN TS315F1600, Руководство пользователя

Страница: 31 / 58

TRANSPORT
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 31
TS315F1600
D A N G E R
A safety instruction designed in this way indicates an imminently hazardous situa-
tion which, if not avoided, will result in death or serious injury.
W A R N I N G
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
C A U T I O N
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
N O T I C E
A safety notice designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
Irrespective of all safety regulations, your common sense and appropriate technical suitabil-
ity/training are and remain the most important safety factor for the fault-free operation of the
machine. Safe working depends first and foremost on you!
13 TRANSPORT
W A R N I N G
Damaged or insufficiently strong hoists and load slings can cause serious injuries
or even death. Always check hoists and load slings for sufficient load-bearing ca-
pacity and that they are free of obstacles, fasten the loads carefully and never
stand under suspended loads.
To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, attachment points, weight, means of transport to be
used and the prescribed transport position, etc..
NOTICE: To lift the machine, you need a forklift truck with the appropriate load capacity and a
fork of at least 1200 mm length. The fork of the truck should be positioned under the machine.
NOTICE: Do not carry the machine at the work tables, these are not designed to withstand
the tensile load of the machine weight.
14 ASSEMBLY
14.1 Checking scope of supply
Check the machine immediately after delivery for transport damage and missing parts.
14.2 The workplace
Choose a suitable place for the machine.
Pay attention to the safety requirements and the dimensions of the machine.
The selected location must ensure a suitable connection to the electrical supply as well as the
possibility of connection to an extraction system. Make sure that the floor can support the load
of the machine. The machine must be levelled simultaneously at all support points. It is also
necessary to guarantee a distance of at least 0.8 m around the machine. In front of and be-
hind the machine, the necessary distance must be provided for the feeding of long workpieces.