HOLZMANN MASCHINEN KAP305ECO, Руководство пользователя

Страница: 30 / 45

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 30
KAP 305ECO
16.2.8 Switch machine ON-OFF
Switch the machine ON:
Press the locking button (1) and then press and hold down
the ON/OFF button (2) on the handle.
Switch the machine OFF:
Release the ON-OFF switch (2)
16.2.9 Switch Laser ON-OFF
Switch the laser on/off with switch (1).
Switch in position 0: Laser switched off
switch in position 1: laser switched on
16.3 Operation modes
16.3.1 Mitre cuts
Mitre are particularly suitable for cutting small workpieces (approx. 100 mm) to length.
 For cross-cut cuts, the sliding mechanism is fixed by the fixation screw (1) so that the saw
unit cannot slide forwards or backwards during the cut.

Adjust the angle setting according to the desired operation and adjust the stops/fences
accordingly.

Mark the cutting line (by laser).

Place workpiece against stop/fence and table and fix with the clamp device.

Move the machine head to the uppermost position.

Switch on the machine and wait until the saw blade has reached full speed (approx. 5 sec.),

Make the crosscut (move the machine head downwards) until it has reached the lowest
position.

Move the machine head to the uppermost position.
N O T E
Machine head is spring loaded, do not simply release the machine head, instead
move the handle upwards until the uppermost position is reached (rest position).

Release the ON-OFF switch and wait until saw blade comes to stand still.

Remove workpiece
16.3.2 Sliding cuts
Sliding cuts are suitable for cutting longer workpieces.