HOLZMANN MASCHINEN KAP305ECO, Руководство пользователя

Страница: 27 / 45

ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 27
KAP 305ECO
 Carrying
Carry load with both hands as close to body as possible.
Carry load with straight back.
N O T I C E
Transport of the unpacked machine only in transport position = saw unit in the lower
position and locked by means of bolt as well as drag lock locked. Lifting the machine
only by the transport handles.
ASSEMBLY
15.1 Checking scope of delivery
Check the machine immediately after delivery for transport damage and missing parts.
15.2 The workplace
Choose a suitable place for the machine.
Pay attention to the safety requirements and the dimensions of the machine.
The selected location must ensure a suitable connection to the electrical supply as well as the
possibility of connection to an extraction system. Ensure that the selected workplace (machine
stand, worktop, ...) can bear the load of the machine and that the machine can be attached to it
using screws (screws are not included in the scope of delivery). The machine must be levelled at
all support points at the same time. In addition, a distance of at least 0.8 m around the machine
must be secured all around. The necessary space for feeding long workpieces must be provided.
Hole pattern for machine mounting:
15.3 Assembling the machine
The machine is pre-assembled. Following assembly-steps are necessary:
Fasten the chip collection bag:
Press the metal ring of the chip collection bag
together and pass it over the chip collection
outlet. When the metal ring is released, the
chip collection bag is fixed to the machine.
Assemble downholder
The workpiece hold-down clamp can be
assembled to the left and right of the saw
blade.
To do this, place the downholder (1) in the
hole (3) on the machine and fix it with the
screw (2).
and the connection to the power supply/extraction system as well as setting up the machine at a
suitable place of work and adjusting the attachments according to the work step.