HOLZMANN MASCHINEN KAP305ECO, Руководство пользователя

Страница: 33 / 45

CLEANING, MAINTENANCE, STORAGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 33
KAP 305ECO
17.2.3 Saw blade change
- Swivel the machine head upwards and lock it with the locking bolt.
- Remove the screw securing the saw blade screw cover.
- Pull the movable guard downwards and then swing it upwards together with the saw blade
screw cover.
- When the movable guard is above the upper fixed guard, the saw blade screw is accessible.
- Hold the movable protective hood in the upper position and lightly press the spindle locking
knob (5) and turn the saw blade until the spindle lock engages.
- Loosen the flange screw by turning it clockwise. ATTENTION: Left-hand thread!
- Remove the flange screw and the flange disc.
- Remove the saw blade from the spindle.
- Place a new saw blade on the spindle. Make sure the direction of rotation is correct!
- Place the flange screw and the flange disc on the spindle and tighten counter clockwise.
- Move the movable protective hood to its initial position
- Re-attach the saw blade screw cover
-
Check that the saw blade guard cover works properly and moves up and down when the saw
arm is moved. (Saw arm position up Saw blade guard covers the saw).
C A U T I O N
Pay attention to correct direction of rotation and dimension of the saw blade.
Limits for dimension: Max. Diameter of 305mm and max. thickness of 3mm, as
well as mounting diameter of 25,4mm.
- Before continuing with your work, make sure that all safety devices are in good operating
condition. (Saw blade protection check)
- Important! Always when you change the saw blade, check that it rotates freely in the table
insert in both cases. Vertical and 45° angle settings.
- Important! The work for changing and aligning the saw blade must be carried out correctly.
C A U T I O N
Risk of injury! Wear protective gloves when changing the saw blade.