manualshive.com logo in svg

Hologic ThinPrep 5000, Руководство оператора, Страница: 62 / 346

Поделиться
Скачать
Hologic ThinPrep 5000 Скачать руководство пользователя страница 62

I

NTRODUCTION

1.14

ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual

1

approved for safety by an appropriate agency should be connected to the ThinPrep 5000 pro-
cessor with AutoLoader.

Safety, EMI and EMC Standards

The ThinPrep 5000 processor with AutoLoader has been tested and certified by a U.S. nationally 
recognized testing Laboratory (NRTL) to comply with current Safety, Electro-Magnetic Interference 
(EMI) and Electro-Magnetic Compatibility (EMC) standards. Refer to the model/rating label, located 
on the rear of the instrument, to see the safety certification markings (see Figure 1-7). This equipment 
meets the IEC 61010-2-101 particular safety requirements for IVD equipment.

This equipment meets the emission and immunity requirements of IEC 61326-2-6. This equipment 
has been tested and found to comply to CISPR 11 Class A emission limits. 

In a domestic environment it may cause radio interference, in which case, you may need to take 
measures to mitigate the interference. The electromagnetic environment should be evaluated prior to 
operation of the equipment. Do not use this device in close proximity to sources of strong 
electromagnetic radiation (e.g., unshielded RF sources), as these may interfere with the proper 
operation.

This product is 

in vitro

 diagnostic (IVD) medical equipment.

If this equipment is used in a manner not specified by the manufacturer, then the protection provided 
by the equipment may be impaired.

Laser Product Safety

This product contains a laser device, used to etch the sample accession ID onto the glass microscope 
slide.

During operation, this laser equipment functions as a Class 1 laser product pursuant to the United 
States Code for Federal Regulation, Title 21, Sub-Chapter J, Part 1040. This Class 1 laser product 
conforms to CEN ELEC EN 60825-1:2007. During normal operation the laser beam and its reflections 
are completely enclosed and there is no laser hazard to persons in the immediate area. There is, 
however, a Class 4 laser inside this product and caution should be taken whenever the access door or 
panels are open.

CAUTION:

 Use of controls and adjustments or performance of procedures other than those 

specified herein may result in hazardous radiation exposure.

The slide laser printing system safety enclosure is interlocked and labeled to ensure safe operation. 
Labels should not be removed. Interlocks should not be defeated by an operator. Service and repair 
of this system must only be performed by trained Hologic personnel.

Содержание ThinPrep 5000



























































































































































































































































































































































Отзывы:

Нет отзывов