manualshive.com logo in svg

Hologic ThinPrep 5000, Руководство оператора, Страница: 250 / 346

Поделиться
Скачать
Hologic ThinPrep 5000 Скачать руководство пользователя страница 250

ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual      

7.33

7

O

PERATING

 I

NSTRUCTIONS

Pause a Batch

A batch may be paused

 

by pressing the 

Pause

 button.

When the 

Pause

 button is pressed the system will complete processing the current vial and then 

pause.

The batch status line will report “Interrupting” as the processor puts items away and parks the 
mechanisms. 

The Batch Paused screen will display when the processing sequence is safely paused. Only the bath 
door is unlocked. Refer to Figure 7-33. 

 Figure 7-33   Interrupting Processing and Processing Paused Screen

While the batch is paused, only the baths area can be accessed. Press the 

Baths

 button to view the 

Baths screen.

Completed slides may be unloaded by removing the fixative bath from the baths compartment. If the 
batch will resume, a fixative bath with no slides must be loaded.

Note:

If the fixative bath is slid out of the compartment slot far enough to disengage with the sensor, 
a new bath without any slides must be loaded in order to resume the batch. Otherwise the 
“No baths available” message will keep repeating.

Close the door and press the 

Done

 button to transition from the Baths screen back to the Paused 

screen.

Press the 

Continue

 button when ready to continue with the batch. 

After pressing the 

Pause

 button, the status 

changes to Interrupting as the system finishes 
the vial in progress and parks the mecha-
nisms

The batch is paused

Baths

 button displays the Baths screen

Stop Processing 

button - ends the batch

Continue

 button continues with the batch in process

SMALL BATCH MODE

Содержание ThinPrep 5000



























































































































































































































































































































































Отзывы:

Нет отзывов