Holiday 2011 Aluma Lite, Руководство пользователя

Страница: 99 / 190

97
e
q
u
Ip
m
e
n
t
-
5
NOTE
Clean and inspect step more frequently
in adverse weather conditions. Mud,
snow, road salts and sand could
quickly break down lubricant and
corrode painted surfaces.
WARNING
No repairs should be attempted by
anyone other than by a qualified
technical professional. The deployment
and retraction of the steps can cause
serious injuries.
Stepwell Storage Compartment
The interior stepwell features a storage
compartment in the upper step. This
compartment is ideal for storing such items
such as gloves (for refueling), tire pressure
gauge, flashlights or outside slippers.
gRAB HANdLE
The grab handle is used to aid in
entering and exiting the motorhome.
Cleaning the Handle:
Clean the acrylic grab handle using
mild Soap and Water only!
What Not To Use:
Do Not use alcohol based glass
cleaners as these solutions adversely
affect acrylic material causing stress
cracks leading to eventual failure of the
grab handle.
Use of alcohol based cleaners
combined with heat and light will
expedite deterioration of the acrylic
material.
ENTRY dOOR
The entry door has three
separate seals to eliminate
wind noise during travel.
There is a lock on the door
handle and a separate dead
bolt for safety and security.
The door also has a primary
and secondary latching system
that ensures secure and safe
latching. If necessary, there
are adjustments that can be
made to maintain entry door
performance.
Adjusting the Entry Door Latch:
Determine which bolt needs
adjustment.




Observe the latch and strike bolt
alignment while slowly closing
the door. Do not attempt to latch
if the alignment is off. If the
alignment is correct, allow the
latch to catch in the first (primary)
position only.
The latch should move to the
second position with only slight
pressure applied to the entry door.
Upper and lower latches should be
evenly timed.
Press on the entry door to check
for further movement of the door.
The entry handle should operate
with little effort. Excessive pressure
indicates the bolt is set too far back.
With a box wrench or socket, loosen
the movable strike bolt. Make all
adjustments in small increments.
Tighten the bolt firmly after making
adjustments.
Test the operation of the dead bolt lock
to ensure proper functions.
Apply silicone weekly to the entry door
rubber gaskets to prevent squeaking
while the motorhome is traveling. Use
a one inch sponge paint brush sprayed
with silicone for easy application.
CAUTION
When operating the entry door ensure
the dead bolt latch is fully in the
unlock position prior to closing the
entry door. Failure to do so can result
in damage to the dead bolt and/or
entry door.







090344d
031327
020131g
020129i