Holiday 2002 NEPTUNE, Руководство пользователя

Страница: 42 / 344

Driving & Safety
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2 0 0 2 N E P T U N E
2 • 42
Tow Car or Trailer:
1. Connect tow car or trailer with light harness to motorhome and
perform a light check.
2. Connect safety chains.
3. Check the tow car or trailer and the motorhome before starting a trip
and at each rest stop.
4. Flat tires on a towed vehicle cannot be detected from the
motorhome while driving. A flat tire causes a safety hazard and
may cause extensive damage. Check the tires on the tow vehicle
frequently.
The motorhome is prewired with a trailer wire harness. The
harness is located on or near the hitch receiver. Convoluted tub-
ing protects the tow harness wires. Current draw should not
exceed ten amps for each designated circuit.
NOTE: When towing a trailer or vehicle with a two-wire
system, a turn signal/brake light converter will be needed to
adapt the tow plug wiring to the item being towed.
The rear view system is designed to provide the driver with a view of the
rear of the motorhome. The field of view is 140° in the diagonal plane, 121° in
the horizontal plane, and 90° in the vertical plane.
The driver can see what is behind the motorhome with the ability to listen
to a guided assistant. This is useful during backing procedures. The rear vision
system will automatically turn ON when the gear selector is placed in reverse.
Turning the main power sitch ON will allow continuous operation of the rear
vision system when the ignition key is ON.
Power Switch:
The switch, when ON (in) position, engages the monitor for
viewing. The green LED indicator illuminates. When the
switch is OFF (out), the monitor is in a STANDBY mode of
operation. The green LED remains illuminated when the igni-
tion is on. The monitor displays rear viewing when the trans-
mission is shifted to
REVERSE .
Camera Selector:
This switch should be left in the CA1 (out) position. CA2 (in)
position is not used in the motorhome.
Tow Plug Connection
BRAKE BRAKE
(RED) (RED)
RIGHT RIGHT TURN TURN
(GREEN) (GREEN)
TAILLIGHT AILLIGHT
(BR (BROWN) WN)
LEFT LEFT TURN TURN
(YELLO (YELLOW) W)
BA BACK UP CK UP
(GREY) (GREY)
GR GROUND OUND
(WHITE) (WHITE)
REAR VIEW
SYSTEM
OM020166
OM080370B