Holiday 2002 NEPTUNE, Руководство пользователя

Страница: 164 / 344

Equipment
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2 0 0 2 N E P T U N E
5 • 164
To Retract the Bedroom Slide-out:
• Check for sufficient clearance inside the motorhome before retracting the
slide-out room.
• Clean the floor, if applicable, to ensure there is no dirt or grit that
could result in floor damage during slide-out retraction.
• Remove any debris from the top of the slide-out room.
• Prior to retracting the slide-out room, start the motorhome. Allow the
air bags to fully inflate to normal travel height.
• Retract the leveling system or prepare the air leveling system for
travel prior to operating the slide-out.
• Turn the ignition switch OFF . The slide-out room will not operate
with the engine running.
• The house batteries are fully charged.
• Locate the control switch for the slide-out, usually located on the
monitor panel.
• Clear all people, pets and objects from the slide-out room path.
• Press and hold the switch in the
IN position. The slide-out room will
move slowly in. To stop the slide-out room before the room reaches
the
IN position, release the switch. To continue the room movement,
push and hold the switch in. The motor will automatically stop when
the slide-out room is fully retracted.
• Release the switch.
• Rain water can pool on the slide-out awning. Added weight will
cause the awning to sag. Upon retracting the room, the material can
catch between the top of the slide room and the opening in the
motorhome. It will be necessary to retract the room in small incre-
ments, allowing the water to run off.
CAUTION: Continuous operation of the slide-out room can
drain the battery and damage the slide-out motor from
overheating. Never move the motorhome without having
the slide-out room retracted.
If the slide-out room does not respond from the switch, check that all the
safety features are in place. The bedroom slide-out system can be retracted in
the event of a power loss.
If the room does not move when the switch is pressed:
• Check if the battery is fully charged and connected.
WARNING: Do not work on the slide-out system unless
the battery is disconnected. Make sure the floor is clean
before retracting the slide-out room. Dirt or grit that is
trapped under the slide-out can cause damage to the floor.
Retracting Bedroom
Slide-out