39
V125T/July 2020/V1.1
CHECK GEARBOX GREASE
The gearbox grease should be checked and replaced at least once a year to ensure maximum
lubrication and cooling, and thus the best performance and durability of the machine.
CHECK ARMATURE
This should be checked at least once per month to check that there are no visual signs of damage to
the body or to the commutator. Some signs of wear will be seen on the commutator over a period of
time, as this part comes in contact with the carbon brushes, but any signs of abnormal damage and
the part should be replaced.
ADJUSTMENT OF SLIDE
An essential requirement of the machine is that the slide can move in a smooth and controlled
manner, free of lateral movement and vibration.
When supplied new, the output shaft has already been adjusted for ideal movement
.
After time and use, the up and down movement may become a little loose, requiring adjustment.
Adjustment can be made via the 5x adjustment screws down the side of the main housing.
[image 20] Slide Adjustment - Adjust screws x5
