30
V125T/July 2020/V1.1
6
Working with operating tools
6.1
The Morse Taper arbor
FITTING THE MORSE TAPER ARBOR
The standard
VERSADRIVE
V125T machine is supplied with a standard MT3 to Weldon arbor.
To fit a morse taper arbor into the machine:
1.
Ensure the machine is unplugged from the supply.
2.
Check the morse taper socket in the machine is clean and free of any debris or swarf.
3.
Check that the arbor or tool to be fitted is clean, undamaged and free from debris or swarf.
4.
Align the tang of the arbor with the slot of the machine socket
5.
Push up the arbor firmly making sure the tang has entered the machine slot.
6.
If necessary, the arbor can be tapped with a soft mallet to ensure it has fully engaged into
the taper.
