5
V125T/July 2020/V1.1
2.1.3
Personal Safety
1.
Stay alert, watch what you are doing and use common sense when using a magnetic drilling
machine. Do not use machine while tired or under the influence of drugs, alcohol, or
medication.
2.
Use personal protective equipment. Always wear eye protection.
3.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool.
4.
Remove any adjusting key or wrench before turning the power tool on.
5.
Do not overreach. Keep proper footing and balance at all times.
6.
Dress properly. Do not wear loose clothing or jewellery. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
7.
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used.
8.
Do not let familiarity gained from frequent use of tools allow you to become complacent and
ignore tool safety principles.
2.1.4
Machine Use and Care
1.
Do not force the power tool. Use the correct power tool for your application.
2.
Do not use the power tool if the switch does not turn it on and off.
3.
Disconnect the plug from the power source and/or remove the battery pack, if detachable,
from the power tool before making any adjustments, changing accessories, or storing power
tools.
4.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
5.
Maintain power tools and accessories. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s operation. If
damaged,
6.
Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the machine operation. If damaged, have the tool serviced before
using by an HMT Authorized Technician. Many accidents are caused by poorly maintained
tools.
7.
Keep cutting tools sharp and clean.
8.
Use the power tool, accessories and tool bits etc. that are recommended by HMT for your
model, in accordance with these instructions, taking into account the working conditions and
the work to be performed.
9.
Keep handles and grasping surfaces dry, clean and free from oil and grease.
2.1.5
Service
•
Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
