17
V125T/July 2020/V1.1
Fitting the coolant system
–
Fit the coolant arbor by engaging the morse taper of the arbor into the
drill units morse taper socket.
The stay bar must be aligned to fit into one of the two slots in the motor support bracket.
See image 7
–
inset below.
[image 7]
–
Guard not shown
The coolant bottle and tap assembly has a mounting bracket which is slotted to allow easy
removal. To fit the bottle, place the bracket over the 2x shoulder bolts then slide down to
lock in place. See image 8 below.
[image 8]
