manualshive.com logo in svg

Hohner UNIVERSAL 52/8 S, Инструкции по эксплуатации, список запасных частей, специальные скобы, опции

Поделиться
Скачать
Hohner UNIVERSAL 52/8 S Скачать руководство пользователя страница 6

Safety Information 

HK 52/8 S 

Hohner Maschinenbau GmbH 

6 

1 Safety Information 

1.1  Purpose of this document 

This document will inform the operator of the 

Stitching Head 52/8 S  

of the following: 

•

 

The safety symbols and signs 

•

 

The packing of the machine and its transportation 

•

 

The function and operation of the machine 

•

 

Commissioning the machine 

•

 

The elimination of faults which arise 

•

 Servicing 

 
Familiarity with this Operating Manual is thus a prerequisite for the safe and correct operation of 
the stitching head. It must be read carefully by the operator before the machine is commissioned. 
Keep the manual safely in a place where it is readily available and which is close to hand for 
persons working on the machine. 
 
 

1.2 The 

operator 

The 

Stitching Head 52/8 S

 must only be operated by trained personnel. 

Training will be undertaken by the manufacturer or by persons who have been authorised by the 
manufacturer to undertake such training. 
 
 

1.3  Safety symbols and the displays that have been used 

 

This symbol indicates immediate danger to the life or health of 
persons in the immediate vicinity of the machine. 

Non-observance of dangers which are so indicated can have grave 
consequences and can cause serious damage to health, or may even to 
lead to deaths. 
 
 

 

 
This symbol indicates that a potentially dangerous situation has 
arisen. 

Non-observance of dangers which are so indicated can lead to slight injuries 
to persons or damage to equipment. 
 
 

 

This symbol indicates that tips on how to use the machine or 
particularly useful information are available.  

These will help you to use all of the functions of the machine in an optimal 
manner. 
 
 
 

-

 

This symbol requires you to take action.

 

 

•

 

This sign serves as a symbol for listing items. 

 

Содержание UNIVERSAL 52/8 S
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды