Hoggi Bingo OT, Руководство пользователя

Страница: 24 / 41

22
The triangular pad guiding gets plugged from the back side
The stamping in the pad guiding must be positioned into the long
hole.
At least 2 washer get plugged and the wing nut gets firmly tightened.
After loosening the wing nut it is possible to adjust the trunk pad
steplessly concerning the height. By twisting from the horizontal to
the upright position it is possible to adjust the width of the pads to
each other.
After reaching the desired position and tightening the wing nuts the
back upholstery is pushed underneath the trunk pads.
The angle of the trunk pad is fixed by tightening the clamping screw
underneath the trunk pad cover.
Whenever you change any settings on the BINGO rehab
pushchair, make sure that you firmly tighten any screws
that have been loosened.
5.7 Pelvic stirrup
The pelvic stirrup is aligned with the lower end of the backrest.
After loosening the fasteners (A) it is possible to adjust the spine
pads concerning the width.
To put on the pelvic stirrup plug the strap (C) into the fastener (B)
and press the pelvic stirrup to the desired position.
By pressing on the button the strap enables and the pelvic stirrup
can be removed.
After adjusting the desired length for the user the “Rastbänder” can
be shortened.
A
C
B