Hoggi Bingo OT, Руководство пользователя

Страница: 14 / 41

12
4 Adjusting and adaptation possibilities
4.1 Wheel lock
To put the wheel lock on push the wheel lock lever downwards and
roll the pushchair slightly back or forward, so that the lock pins can
engage in the brake disc. Never use force! This could damage the
quick release mechanisms and the wheels could fall off and cause
injuries.
The wheel lock should not be actuated while the push chair is
moving!
To disengage the wheel lock pull the wheel lock lever upwards
with your toe.
4.2 Height adjustment of the push handle
The ratchet joints allow adjustment of the push handle to a
convenient height. To operate the ratchet joints, push the buttons on
the outside of the push handle.
4.3 Seat depth and seat width
After loosening the knurled nuts underneath the seat you can adjust:
• The seat depth by moving the knee angle assembly in or out .
The minimum seat depth of 16 / 21 cm (6 - 8 inches) that you
achieve is accomplished by taking out the four foam pads (access
from underneath) in the front part of the seat upholstery.
• The seat width by moving the hip pads in or out
Whenever you change any settings on the BINGO rehab
pushchair, make sure that you firmly tighten any screws
that have been loosened.