Hoggi Bingo OT, Руководство пользователя

Страница: 26 / 41

24
5.10 Five point harness
The five point harness should be installed by authorized dealers or
trained technicians.
Take the seat upholstery off first. Loosen all the carriage bolts of the
hip pads. Pull out the seat plate completely to get easy access to the
set of rectangular slots in the seat plate underneath the hook strap.
Choose one of them according to the desired seat depth and slot
it with a cutter. The position should be close to the body but not
underneath the bottom. Thread the strap from above through the
slot and between seatplate and seat base to the rear edge of the
seat plate. Place the thickened end of the strap right to this edge
so that the strap is firmly secured after tightening the bolts. Put the
seat plate and the hip pads to the desired position and tighten the
carriage bolts.
Put the seat upholstery back again and thread the other end of the
strap through the slot in the seat upholstery.
To attach the strap to the buckle proceed as described in 5.8 lap
belt.
Lead the shoulder straps together with the pad straps through the
designated slots in the back insert
Fix the shoulder straps to the slots in the back base as described in
5.8 lap belt
Tie the pad straps together.
The shoulder straps should be adjusted in a way that the housing of
the length adjusters rest on the shoulder padding.