Hoggi Bingo OT, Руководство пользователя

Страница: 9 / 41

8
• The Allen wrench (size 4 mm) for this and for most other
adjustments you can find mounted in the joint slider of the backrest
• In addition to the clamping bolts, the back insert is fixed and
secured by two carriage bolts with knurled nuts, which also limit
the maximum back height.
• It is recommended to adjust the seat unit to the desired settings
before you put on the upholstery parts. See therefore chapter 4
„Adjusting and Adaptation possibilities“
• Put the seat upholstery on the seat so that the corresponding hook
& loop straps on seat and upholstery are connected. The rear part
of the upholstery should line up with the rear seat edge.
• Put the hip upholsteries on the hip brackets and connect the
corresponding hook & loop straps